Protecting Your Investment And Keeping Your Lawn Beautiful - Tips For Hydroseeder Maintenance

Posted on: 15 April 2015

Whether you own a modestly sized home with a small lawn or a golf course with rolling acres of green space, keeping your grass in its best condition can be a challenge. While regularly spreading grass seed is a great way to keep your lawn looking fresh, figuring out how to achieve that goal without back breaking labor and a frustrating process can be difficult.

Thankfully, the development of the hydroseeder allows for seed, water, and fertilizer to be evenly spread over a given area with less stress on you. Below, you'll find a guide to maintaining your hydroseeder, allowing you to always have a reliable method for keeping your lawn in the shape you most desire.

Oil Changes

Just as with your car, one of the most important things you can do to keep your hydroseeder's engine running smoothly is complete regular oil changes. Making sure that you keep the oil reservoir topped off and change the filter regularly will guarantee that your hydroseeder doesn't break down at an inconvenient time and force you into physical labor.

In most cases, you should use a synthetic blend oil, as it won't break down over time and merely needs to be filtered. This is important for equipment such as a hydroseeder, which may not be commonly used but needs to be reliable when you require it.

Pump Maintenance

Your hydroseeder works by forcing pressurized water through a reservoir of seed and fertilizer, so if the force from your pumps is weak, you're unlikely to get adequate coverage. This can lead to a patchy lawn and spots that look as though you've neglected them entirely.

It's important to verify that the seals on your pumps remain solid and that each pump is functioning efficiently. Gear pumps can also be relatively easily adjusted to achieve the force you desire, which can also allow you to take some of the pressure off the machinery when you don't need full power.

Hoses and Nozzles

The actual distribution of seed and fertilizer relies on hoses and nozzles that may be at risk of splitting if stored for long periods of time. If you haven't used your hydroseeder in a while, it's important that you check it thoroughly to make sure there aren't any cracks or separations in its hoses. You should also verify that there are no blockages from previous seed applications that could cause your pumps to work too hard and overheat.

For more information about hydroseeding, visit http://www.hydroseedingandbarkblowersinc.com.

Share